a polyurethane clear coat gives an added layer of sheen and hardens and protects the paint. match oil-based top coats with oil paint and water-based top coats with water-based paint. hold the can 10 to 12 inches away and spray using a back and forth motion. follow the natural lines of the chair to coat it evenly.
the 2 best ways to paint laminate furniture method 1. step 1. clean the surface. this dresser was dusty so all that was needed to clean it was a soft cloth dampened with warm water. if it had had grease or staining, i would have used vinegar and water or a tsp solution.
veneer is actually a very thin piece of real wood adhered to a cheaper wood, manufactured wood, mdf etc. laminate cannot be stained. it must only be painted, and it requires priming first yes, can use oil-based primer, then latex paint over that, just make sure each process is allowed to thoroughly dry between applications .
apply a primer. when painting wood furniture you should always use a primer first. primer will help protect the wood, and it will also create a smooth best to help you get better adhesion and truer color from your paint. when applying primer, just as you did with the sandpaper, move in the same direction as the wood grain for best results.
when you're on a budget, laminate furniture is often a less costly alternative to wooden pieces. but when the laminate pieces are large items such as a dresser and nightstands in a bedroom, you
look for a high-quality bonding primer to paint over the piece as a base coatthey're designed specifically to get paints to adhere to a range of surfaces. and as a bonus, it will also help you prep metal, vinyl, glass, and other surfaces for painting in the future if you don't get through the whole gallon.
the best painted dresser before-and-afters take something dated and turn it into a piece that is much more fitted to the space. this dresser had been painted numerous times and the faux wood look using brown paint was heavy and worn. opting to repaint the dresser in a solid color lightened the overall look and made the piece more eclectic.
refinish your painted dresser or wood furniture in a way you can be proud of watch the video below to see how to repaint a dresser, and keep reading for all the details. repainting painted furniture or previously varnished furniture isn't as easy as it sounds.
the shape and style of your pressed wood media cabinet, wall system or dresser are still appealing, but the faux wood finish has got to go. paint is the obvious answer -- if the piece can handle a coat of color without bubbling, peeling or falling apart. transforming that inexpensive bargain into a thing of beauty is possible -- and just a weekend away -- with the right tools and a light touch.
next, sand your furniture and get all of the glossy finish off so that the paint will have a good surface to grab onto. medium-grit sandpaper should be fine. i use fine-grit between paint coats. if you are painting as opposed to staining, there is no need to strip the finish or sand it down to the bare wood.
repainting painted wood furniture. in conclusion, yes you can paint over painted furniture at your own discretion. there are times where using a paint stripper may be beneficial when repainting painted furniture. often it depends on what paint is already on the piece, so when possible, know your products. keep in mind that your paint will only
make sure you are using a fine-grit sandpaper. the rougher the sandpaper, the deeper the grooves created in the furniture. youre not trying to sand through to the wood usually , just to the finish beneath that layer of paint. where and how much paint you sand off is strictly a personal preference.
in certain areas, i used a brush first, then went over the same surface with the roller to achieve a smooth, stroke-less surface. heres the bookcase with the first coat of paint. heres a tip. if the surface isnt sanded or not sanded enough, then the paint will bubble because its not adhering to the surface .
evaluate your furniture. take a good look at your furniture and decide if painting or staining is even worth it. you can certainly fix a wobbly chair or repair scratches and dents, but if a chair is rotted or the plastic leg of a table is cracked and falling apart, it may be time for new furniture.
if your scratch test fails, give your furniture a quick light sanding. its not a big deal. take a 150-220 grit sand paper and wipe the surface down as you would your kitchen counter just enough to scruff it up a little. then take a tack cloth to remove all the dust.
how to paint a dresser. if you've got a dresser or chest of ders that doesn't quite match the rest of your home's decor, don't throw it outrepaint it a fresh coat of paint can breathe new life into an old, unflattering piece. start by
in this case i chose to keep the wooden knobs and paint them. for this the same priming, painting, sanding and varnishing steps apply, though its particularly important to use a light hand- too much product on your brush will inevitably cause drips. if painting the der pulls, come up with a way of keeping them from touching other surfaces.
composite wood as i know it to be is the wood alternative that a lot of people are using for their decks now a days. if it is mdf or particle board then it is not designed to stain but it will paint really nice. once you paint it you can put a decretive finish on it.
paint is the easiest way to refinish your dresser and nightstands. simply painting them a new shade can give the pieces new life. you can use either latex- or oil-based paint on your laminate furniture. latex paint dries more quickly than oil-based paint, but an oil-based formula tends to hide brush strokes better.
and after i consulted my guidelines about when should you not paint wood furniture, the dresser passed the girl, go get your paint brush test. how to paint a dresser. painting furniture is super easy. dont believe me? just watch the transformation of this one in the video are you subscribed to me on youtube?
how to: refinish a dresser do you have a dresser in good condition but with a dingy, worse-for-wear finish? with only a little elbow grease, you can transform it into a stunning signature piece.
paint the furniture with interior latex or acrylic paint. use a paintbrush for all areas that can't be reached with a roller. follow with a smooth foam roller to eliminate brush strokes and smooth out visible seams. apply paint with a roller for all larger surfaces. a smooth foam roller applies paint in a thin, even coat.
prime the entire piece evenly and let dry. for the ders, mask-off the inside side rails so that the primer only touches the der front. put a tarp on a countertop or a work bench, and then set the ders on it with the front over the edge. this makes it easy to work in a standing position.
let the primer dry completely. follow up with an application of paint over the primer. add coats of paint until the furniture shows the correct depth of color and the surface is smooth and uniform, allowing the paint to dry in between coats. replace the hardware once the final coat of paint is dry.
step 1 remove all hardware and wipe down the piece. clean surface dirt and dust to make the sanding job easier. fill in holes from the hardware if you will replace it with new hardware once the piece is painted. let any wood filler dry completely before sanding.
step 1, take off any handles or knobs from the furniture. put them in a plastic bag so you dont lose them. if something wont detach from the furniture, cover it with painters tape.step 2, fill in dents in the furniture with a wood filler. you can find wood filler at your local hardware store. let the filler dry per the instructions on the label. 1 step 3, use a 120-grit sandpaper to lightly sand the furnitures surface. sand in circular motions until the surface of the furniture
here are 5 ways to paint furniture without sanding: 1. use a chalk paint this is hands-down the most common and well known way to paint pretty much anything without sanding. the huge mass appeal of chalk paint is not only the gorgeous matte finish, but the no prep promise. id argue that chalk paints are the cornerstone of the painted
prime using a mini foam roller. use a foam brush to get into any hard-to-reach areas. let dry according to the instructions on the can of primer. once your primer is fully dry, sand away any drips with a 220-grit sanding block, and wipe your piece down with a tack cloth.